STM32MP1xx_System_Private_Functions

Functions
void	SystemInit (void)
	Setup the microcontroller system Initialize the FPU setting, vector table location and External memory configuration.
void	SystemCoreClockUpdate (void)
	Update SystemCoreClock variable according to Clock Register Values.

Detailed Description

Function Documentation

SystemCoreClockUpdate()

void SystemCoreClockUpdate

(

void

)

Update SystemCoreClock variable according to Clock Register Values.

The SystemCoreClock variable contains the core clock frequency (Hz), it can be used by the user application to setup the SysTick timer or configure other parameters.

Note

Each time the core clock changes, this function must be called to update SystemCoreClock variable value. Otherwise, any configuration based on this variable will be incorrect.

- The system frequency computed by this function is not the real frequency in the chip. It is calculated based on the predefined constant and the selected clock source:

• If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
• If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
• If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(***)
• If SYSCLK source is PLL3_P, SystemCoreClock will contain the HSI_VALUE(*) or the HSE_VALUE(*) or the CSI_VALUE(***) multiplied/divided by the PLL3 factors.

(*) HSI_VALUE is a constant defined in stm32mp1xx_hal_conf.h file (default value 64 MHz) but the real value may vary depending on the variations in voltage and temperature.

(**) HSE_VALUE is a constant defined in stm32mp1xx_hal_conf.h file (default value 24 MHz), user has to ensure that HSE_VALUE is same as the real frequency of the crystal used. Otherwise, this function may have wrong result.

(***) CSI_VALUE is a constant defined in stm32mp1xx_hal_conf.h file (default value 4 MHz)but the real value may vary depending on the variations in voltage and temperature.

• The result of this function could be not correct when using fractional value for HSE crystal.