HAL default configuration template file. More...

#include "stm32yyxx_hal_conf.h"
#include "stm32c0xx_hal_adc.h"
#include "stm32c0xx_hal_adc_ex.h"
#include "stm32c0xx_hal_crc.h"
#include "stm32c0xx_hal_fdcan.h"
#include "stm32c0xx_hal_i2c.h"
#include "stm32c0xx_hal_pcd.h"
#include "stm32c0xx_hal_pwr.h"
#include "stm32c0xx_hal_spi.h"
#include "stm32c0xx_hal_tim.h"
#include "stm32c0xx_hal_uart.h"

Macros
#define	USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
	Include the default list of modules to be used in the HAL driver and manage module deactivation.

#define	USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */

#define	USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */

#define	USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */

#define	USE_HAL_IWDG_REGISTER_CALLBACKS 0U /* IWDG register callback disabled */

#define	USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */

#define	USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */

#define	USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */

#define	USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */

#define	USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */

#define	USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */

#define	USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */

#define	USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */

#define	HSE_VALUE (24000000U)
	Adjust the value of External High Speed oscillator (HSE) used in your application.

#define	HSE_STARTUP_TIMEOUT (100UL)

#define	HSI_VALUE (48000000U)
	Internal High Speed oscillator (HSI) value.

#define	HSI48_VALUE 48000000U
	Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.

#define	LSI_VALUE (32000UL)
	Internal Low Speed oscillator (LSI) value.

#define	LSI_STARTUP_TIME 130UL

#define	LSE_VALUE (32768UL)
	External Low Speed oscillator (LSE) value.

#define	LSE_STARTUP_TIMEOUT (5000UL)

#define	EXTERNAL_I2S1_CLOCK_VALUE (48000UL)
	External clock source for I2S1 peripheral This value is used by the RCC HAL module to compute the I2S1 clock source frequency.

#define	VDD_VALUE (3300UL)
	This is the HAL system configuration section.

#define	TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL)

#define	USE_RTOS 0U

#define	PREFETCH_ENABLE 1U

#define	INSTRUCTION_CACHE_ENABLE 1U

#define	assert_param(expr) ((void)0U)
	Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Detailed Description

HAL default configuration template file.

This file should be copied to the application folder and renamed to stm32c0xx_hal_conf.h.

Attention

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.

Macro Definition Documentation

◆ assert_param

#define assert_param ( expr ) ((void)0U)

Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Include modules header file

◆ EXTERNAL_I2S1_CLOCK_VALUE

#define EXTERNAL_I2S1_CLOCK_VALUE (48000UL)

External clock source for I2S1 peripheral This value is used by the RCC HAL module to compute the I2S1 clock source frequency.

Value of the I2S1 External clock source in Hz

◆ HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT (100UL)

Time out for HSE start up, in ms

◆ HSE_VALUE

#define HSE_VALUE (24000000U)

Adjust the value of External High Speed oscillator (HSE) used in your application.

This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL). Value of the External oscillator in Hz

◆ HSI48_VALUE

#define HSI48_VALUE 48000000U

Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.

This internal oscillator is mainly dedicated to provide a high precision clock to the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. When the CRS is not used, the HSI48 RC oscillator runs on it default frequency which is subject to manufacturing process variations. Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. The real value may vary depending on manufacturing process variations.

◆ HSI_VALUE

#define HSI_VALUE (48000000U)

Internal High Speed oscillator (HSI) value.

This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). Value of the Internal oscillator in Hz

◆ LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT (5000UL)

Time out for LSE start up, in ms

◆ LSE_VALUE

#define LSE_VALUE (32768UL)

External Low Speed oscillator (LSE) value.

This value is used by the UART, RTC HAL module to compute the system frequency Value of the External oscillator in Hz

◆ LSI_STARTUP_TIME

#define LSI_STARTUP_TIME 130UL

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. Time out for LSI start up, in ms

◆ LSI_VALUE

#define LSI_VALUE (32000UL)

Internal Low Speed oscillator (LSI) value.

LSI Typical Value in Hz

◆ TICK_INT_PRIORITY

#define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL)

tick interrupt priority

◆ USE_HAL_ADC_REGISTER_CALLBACKS

#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */

Include the default list of modules to be used in the HAL driver and manage module deactivation.

Set below the peripheral configuration to "1U" to add the support of HAL callback registration/unregistration feature for the HAL driver(s). This allows user application to provide specific callback functions thanks to HAL_PPP_RegisterCallback() rather than overwriting the default weak callback functions (see each stm32c0xx_hal_ppp.h file for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef for each PPP peripheral).

◆ VDD_VALUE

#define VDD_VALUE (3300UL)

This is the HAL system configuration section.

Value of VDD in mv

Macros