HAL default configuration file. More...

#include "stm32yyxx_hal_conf.h"
#include "stm32f0xx_hal_adc.h"
#include "stm32f0xx_hal_crc.h"
#include "stm32f0xx_hal_dac.h"
#include "stm32f0xx_hal_i2c.h"
#include "stm32f0xx_hal_pcd.h"
#include "stm32f0xx_hal_pwr.h"
#include "stm32f0xx_hal_spi.h"
#include "stm32f0xx_hal_tim.h"
#include "stm32f0xx_hal_uart.h"

Macros
#define	HSE_VALUE 8000000U
	Include the default list of modules to be used in the HAL driver and manage module deactivation.

#define	HSE_STARTUP_TIMEOUT 100U
	In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value.

#define	HSI_VALUE 8000000U
	Internal High Speed oscillator (HSI) value.

#define	HSI_STARTUP_TIMEOUT 5000U
	In the following line adjust the Internal High Speed oscillator (HSI) Startup Timeout value.

#define	HSI14_VALUE 14000000U
	Internal High Speed oscillator for ADC (HSI14) value.

#define	HSI48_VALUE 48000000U
	Internal High Speed oscillator for USB (HSI48) value.

#define	LSI_VALUE 32000U
	Internal Low Speed oscillator (LSI) value.

#define	LSE_VALUE 32768U
	External Low Speed oscillator (LSE) value.

#define	LSE_STARTUP_TIMEOUT 5000U
	Time out for LSE start up value in ms.

#define	VDD_VALUE 3300U
	This is the HAL system configuration section.

#define	TICK_INT_PRIORITY 0x00U

#define	USE_RTOS 0U

#define	PREFETCH_ENABLE 1U

#define	INSTRUCTION_CACHE_ENABLE 0U

#define	DATA_CACHE_ENABLE 0U

#define	USE_SPI_CRC 0U

#define	USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */

#define	USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */

#define	USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */

#define	USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */

#define	USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */

#define	USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */

#define	USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */

#define	USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */

#define	USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */

#define	USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */

#define	USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */

#define	USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */

#define	USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */

#define	USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */

#define	USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */

#define	USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */

#define	USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */

#define	USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */

#define	assert_param(expr) ((void)0U)
	Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Detailed Description

HAL default configuration file.

Attention

© Copyright (c) 2016 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Macro Definition Documentation

◆ assert_param

#define assert_param ( expr ) ((void)0U)

Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Include module's header file

◆ HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT 100U

In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value.

Time out for HSE start up, in ms

◆ HSE_VALUE

#define HSE_VALUE 8000000U

Include the default list of modules to be used in the HAL driver and manage module deactivation.

Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL). Value of the External oscillator in Hz

◆ HSI14_VALUE

#define HSI14_VALUE 14000000U

Internal High Speed oscillator for ADC (HSI14) value.

Value of the Internal High Speed oscillator for ADC in Hz. The real value may vary depending on the variations in voltage and temperature.

◆ HSI48_VALUE

#define HSI48_VALUE 48000000U

Internal High Speed oscillator for USB (HSI48) value.

Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature.

◆ HSI_STARTUP_TIMEOUT

#define HSI_STARTUP_TIMEOUT 5000U

In the following line adjust the Internal High Speed oscillator (HSI) Startup Timeout value.

Time out for HSI start up

◆ HSI_VALUE

#define HSI_VALUE 8000000U

Internal High Speed oscillator (HSI) value.

This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). Value of the Internal oscillator in Hz

◆ LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT 5000U

Time out for LSE start up value in ms.

Time out for LSE start up, in ms

◆ LSE_VALUE

#define LSE_VALUE 32768U

External Low Speed oscillator (LSE) value.

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.
Value of the External Low Speed oscillator in Hz

◆ TICK_INT_PRIORITY

#define TICK_INT_PRIORITY 0x00U

tick interrupt priority

◆ VDD_VALUE

#define VDD_VALUE 3300U

This is the HAL system configuration section.

Value of VDD in mv

Macros