stm32g0xx_hal_conf_default.h File Reference

HAL default configuration file. More...

#include "stm32yyxx_hal_conf.h"
#include "stm32g0xx_hal_adc.h"
#include "stm32g0xx_hal_adc_ex.h"
#include "stm32g0xx_hal_crc.h"
#include "stm32g0xx_hal_dac.h"
#include "stm32g0xx_hal_fdcan.h"
#include "stm32g0xx_hal_i2c.h"
#include "stm32g0xx_hal_pcd.h"
#include "stm32g0xx_hal_pwr.h"
#include "stm32g0xx_hal_spi.h"
#include "stm32g0xx_hal_tim.h"
#include "stm32g0xx_hal_uart.h"

Macros
#define	USE_HAL_ADC_REGISTER_CALLBACKS   0u
	Include the default list of modules to be used in the HAL driver and manage module deactivation.
#define	USE_HAL_CEC_REGISTER_CALLBACKS   0u
#define	USE_HAL_COMP_REGISTER_CALLBACKS   0u
#define	USE_HAL_CRYP_REGISTER_CALLBACKS   0u
#define	USE_HAL_DAC_REGISTER_CALLBACKS   0u
#define	USE_HAL_FDCAN_REGISTER_CALLBACKS   0u
#define	USE_HAL_I2C_REGISTER_CALLBACKS   0u
#define	USE_HAL_I2S_REGISTER_CALLBACKS   0u
#define	USE_HAL_IRDA_REGISTER_CALLBACKS   0u
#define	USE_HAL_LPTIM_REGISTER_CALLBACKS   0u
#define	USE_HAL_HCD_REGISTER_CALLBACKS   0u
#define	USE_HAL_PCD_REGISTER_CALLBACKS   0u
#define	USE_HAL_RNG_REGISTER_CALLBACKS   0u
#define	USE_HAL_RTC_REGISTER_CALLBACKS   0u
#define	USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0u
#define	USE_HAL_SMBUS_REGISTER_CALLBACKS   0u
#define	USE_HAL_SPI_REGISTER_CALLBACKS   0u
#define	USE_HAL_TIM_REGISTER_CALLBACKS   0u
#define	USE_HAL_UART_REGISTER_CALLBACKS   0u
#define	USE_HAL_USART_REGISTER_CALLBACKS   0u
#define	USE_HAL_WWDG_REGISTER_CALLBACKS   0u
#define	HSE_VALUE   (8000000UL)
	Adjust the value of External High Speed oscillator (HSE) used in your application.
#define	HSE_STARTUP_TIMEOUT   (100UL)
#define	HSI_VALUE   (16000000UL)
	Internal High Speed oscillator (HSI) value.
#define	LSI_VALUE   (32000UL)
	Internal Low Speed oscillator (LSI) value.
#define	LSE_VALUE   (32768UL)
	External Low Speed oscillator (LSE) value.
#define	LSE_STARTUP_TIMEOUT   (5000UL)
#define	EXTERNAL_I2S1_CLOCK_VALUE   (48000UL)
	External clock source for I2S1 peripheral This value is used by the RCC HAL module to compute the I2S1 clock source frequency.
#define	VDD_VALUE   (3300UL)
	This is the HAL system configuration section.
#define	TICK_INT_PRIORITY   0x00U
#define	USE_RTOS   0U
#define	PREFETCH_ENABLE   1U
#define	INSTRUCTION_CACHE_ENABLE   1U
#define	USE_SPI_CRC   0U
#define	USE_HAL_CRYP_SUSPEND_RESUME   1U
#define	assert_param(expr)   ((void)0U)
	Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Detailed Description

HAL default configuration file.

Attention

© Copyright (c) 2018 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Macro Definition Documentation

assert_param

#define assert_param

(

expr

)

((void)0U)

Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Include modules header file

EXTERNAL_I2S1_CLOCK_VALUE

#define EXTERNAL_I2S1_CLOCK_VALUE   (48000UL)

External clock source for I2S1 peripheral This value is used by the RCC HAL module to compute the I2S1 clock source frequency.

Value of the I2S1 External clock source in Hz

HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT   (100UL)

Time out for HSE start up, in ms

HSE_VALUE

#define HSE_VALUE   (8000000UL)

Adjust the value of External High Speed oscillator (HSE) used in your application.

This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL). Value of the External oscillator in Hz

HSI_VALUE

#define HSI_VALUE   (16000000UL)

Internal High Speed oscillator (HSI) value.

This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). Value of the Internal oscillator in Hz

LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT   (5000UL)

Time out for LSE start up, in ms

LSE_VALUE

#define LSE_VALUE   (32768UL)

External Low Speed oscillator (LSE) value.

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. This value is used by the UART, RTC HAL module to compute the system frequency Value of the External oscillator in Hz

LSI_VALUE

#define LSI_VALUE   (32000UL)

Internal Low Speed oscillator (LSI) value.

LSI Typical Value in Hz

TICK_INT_PRIORITY

#define TICK_INT_PRIORITY   0x00U

tick interrupt priority

USE_HAL_ADC_REGISTER_CALLBACKS

#define USE_HAL_ADC_REGISTER_CALLBACKS   0u

Include the default list of modules to be used in the HAL driver and manage module deactivation.

This is the list of modules where register callback can be used

VDD_VALUE

#define VDD_VALUE   (3300UL)

This is the HAL system configuration section.

Value of VDD in mv