HAL default configuration file. More...

#include "stm32yyxx_hal_conf.h"
#include "stm32wlxx_hal_adc.h"
#include "stm32wlxx_hal_crc.h"
#include "stm32wlxx_hal_dac.h"
#include "stm32wlxx_hal_i2c.h"
#include "stm32wlxx_hal_pwr.h"
#include "stm32wlxx_hal_spi.h"
#include "stm32wlxx_hal_tim.h"
#include "stm32wlxx_hal_uart.h"

Macros
#define	USE_HAL_ADC_REGISTER_CALLBACKS 0u
	Include the default list of modules to be used in the HAL driver and manage module deactivation.

#define	USE_HAL_COMP_REGISTER_CALLBACKS 0u

#define	USE_HAL_CRYP_REGISTER_CALLBACKS 0u

#define	USE_HAL_DAC_REGISTER_CALLBACKS 0u

#define	USE_HAL_I2C_REGISTER_CALLBACKS 0u

#define	USE_HAL_I2S_REGISTER_CALLBACKS 0u

#define	USE_HAL_IRDA_REGISTER_CALLBACKS 0u

#define	USE_HAL_LPTIM_REGISTER_CALLBACKS 0u

#define	USE_HAL_PKA_REGISTER_CALLBACKS 0u

#define	USE_HAL_RNG_REGISTER_CALLBACKS 0u

#define	USE_HAL_RTC_REGISTER_CALLBACKS 0u

#define	USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u

#define	USE_HAL_SMBUS_REGISTER_CALLBACKS 0u

#define	USE_HAL_SPI_REGISTER_CALLBACKS 0u

#define	USE_HAL_SUBGHZ_REGISTER_CALLBACKS 0u

#define	USE_HAL_TIM_REGISTER_CALLBACKS 0u

#define	USE_HAL_UART_REGISTER_CALLBACKS 0u

#define	USE_HAL_USART_REGISTER_CALLBACKS 0u

#define	USE_HAL_WWDG_REGISTER_CALLBACKS 0u

#define	HSE_VALUE 32000000UL
	Adjust the value of External High Speed oscillator (HSE) used in your application.

#define	HSE_STARTUP_TIMEOUT 100UL

#define	MSI_VALUE 4000000UL
	Internal Multiple Speed oscillator (MSI) default value.

#define	HSI_VALUE 16000000UL
	Internal High Speed oscillator (HSI) value.

#define	LSI_VALUE 32000UL
	Internal Low Speed oscillator (LSI) value.

#define	LSE_VALUE 32768UL
	External Low Speed oscillator (LSE) value.

#define	HSI48_VALUE 48000000UL
	Internal Multiple Speed oscillator (HSI48) default value.

#define	LSE_STARTUP_TIMEOUT 5000UL

#define	VDD_VALUE 3300U
	This is the HAL system configuration section.

#define	TICK_INT_PRIORITY 0x00U

#define	USE_RTOS 0U

#define	PREFETCH_ENABLE 0U

#define	INSTRUCTION_CACHE_ENABLE 1U

#define	DATA_CACHE_ENABLE 1U

#define	USE_SPI_CRC 0U
	Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

#define	USE_HAL_CRYP_SUSPEND_RESUME 1U

#define	assert_param(expr) ((void)0U)
	Include module's header file.

Detailed Description

HAL default configuration file.

Attention

© Copyright (c) 2020 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Macro Definition Documentation

◆ HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT 100UL

Time out for HSE start up, in ms

◆ HSE_VALUE

#define HSE_VALUE 32000000UL

Adjust the value of External High Speed oscillator (HSE) used in your application.

This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL). Value of the External oscillator in Hz

◆ HSI48_VALUE

#define HSI48_VALUE 48000000UL

Internal Multiple Speed oscillator (HSI48) default value.

This value is the default HSI48 range value after Reset. Value of the Internal oscillator in Hz

◆ HSI_VALUE

#define HSI_VALUE 16000000UL

Internal High Speed oscillator (HSI) value.

This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). Value of the Internal oscillator in Hz

◆ LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT 5000UL

Time out for LSE start up, in ms

◆ LSE_VALUE

#define LSE_VALUE 32768UL

External Low Speed oscillator (LSE) value.

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. This value is used by the UART, RTC HAL module to compute the system frequency Value of the External oscillator in Hz

◆ LSI_VALUE

#define LSI_VALUE 32000UL

Internal Low Speed oscillator (LSI) value.

LSI Typical Value in Hz

◆ MSI_VALUE

#define MSI_VALUE 4000000UL

Internal Multiple Speed oscillator (MSI) default value.

This value is the default MSI range value after Reset. Value of the Internal oscillator in Hz

◆ TICK_INT_PRIORITY

#define TICK_INT_PRIORITY 0x00U

tick interrupt priority

◆ USE_HAL_ADC_REGISTER_CALLBACKS

#define USE_HAL_ADC_REGISTER_CALLBACKS 0u

Include the default list of modules to be used in the HAL driver and manage module deactivation.

This is the list of modules where register callback can be used

◆ VDD_VALUE

#define VDD_VALUE 3300U

This is the HAL system configuration section.

Value of VDD in mv

Macros